A division of
|
|
|
|
|
|
1030 Evans Ave.
Akron, OH 44305
Tel: 330.630.9460
Fax: 330.630.2857
|
|
Shincor No Post Cure Silicone Compounds
|
 Description: This is a series of compounds which, when properly catalyzed, can be used in a variety of applications requiring finishing by molding, extruding or calendering.
Product Features: All of the products in this series can be blended with one another or with Shincor general purpose bases for intermediate properties. The 40 through 70 durometer No Post Cure bases readily accept extending fillers.
Typical Properties when catalyzed with DBPH (1) |
| Product Number |
SG-040 |
SG-060 |
SN-070 |
SN-080 |
| Press Cured Properties |
| Hardness, Shore A |
42 |
62 |
73 |
79 |
| Tensile Strength, psi |
750 |
1302 |
1120 |
1249 |
| Modulus @ 100%, psi |
141 |
289 |
522 |
960 |
| Elongation, % |
345 |
352 |
218 |
121 |
| Specific Gravity |
1.09 |
1.16 |
1.20 |
1.32 |
| Tear, Die B, ppi |
52 |
87 |
102 |
93 |
| Comp . Set, Method B |
| 22 hrs @ 177 deg. celsius |
11 |
17 |
8 |
8 |
| Heat Aged 70 hrs @ 225 deg. celsius |
| Hardness, points, Change |
+1 |
+3 |
+3 |
+3 |
| Tensile Strength, % change |
5.1 |
-7 |
-18 |
-17 |
| Elongation, % |
2.3 |
-9 |
-21 |
-18 |
| ASTM #1 Oil, 70 hrs @ 149 deg. celsius |
| Hardness, points, Change |
-6 |
-6 |
-3 |
-3 |
| Tensile Strength, % change |
23.9 |
-1 |
5 |
-2 |
| Elongation, % change |
16.2 |
-3 |
1 |
4 |
| Volume, % change |
4.7 |
3.7 |
3 |
3 |
| #903 Oil, 70 hrs @ 149 deg. celsius |
| Volume, % change |
57 |
38 |
37 |
28 |
| These values are typical and are not to be used to set specifications. Please contact your local sales representative to discuss your particular application. |
DISCLAIMER
Information given herein is furnished in good faith, without warranty, representation, inducement or a license of any kind. Shincor does not assume any legal responsibility for use of or reliance upon same. No warranty or representation is given that SHINCOR products described will be suitable in purchasers' formulations or processes for any particular end use. No representation is given as to freedom from patent infringement. Materials not manufactured or supplied by SHINCOR may present hazards in handling and use. Reference should be made to the manufacturer or supplier for all information relating to such materials. |
|
quality goal | sales representation |
facilities products | contact us
Hosted by
The MIS Group at Shin-Etsu and Shincor Silicones , Inc.
Best viewed with Internet Explorer
and 800 x 600 resolution |
|
|