A division of 1030 Evans Ave. Akron, OH 44305 Tel: 330.630.9460 Fax: 330.630.2857 TR> Shincor Addition Cure Silicone Compounds for Extrusion Description: This is a series of compounds designed for use in a variety of extrusion applications. Each compound is supplied as an A/B compound which requires mixing of the A and B components in a 1:1 ratio before curing. Product Features: * Good handling characteristics * Excellent tear strength Typical properties after a press cure of 10 minutes at 171°C (340°F) and an oven cure of 2 hours at 200 deg. celsius (392 deg. fahrenheit): Product Number SA-240 SA-250 SA-260 SA-270 Properties Hardness, Shore A 42 52 62 70 Tensile Strength, psi 1160 1405 1270 1270 Modulus @ 100%, psi 230 280 545 360 Elongation, % 740 880 585 715 Specific Gravity 1.09 1.14 1.15 1.20 Tear, Die B, ppi 200 250 315 225 Comp . Set, Method B 22 hrs @ 177 deg. celsius 14 23 19 39 These values are typical and are not to be used to set specifications. Please contact your local sales representative to discuss your particular application. DISCLAIMER Information given herein is furnished in good faith, without warranty, representation, inducement or a license of any kind. Shincor does not assume any legal responsibility for use of or reliance upon same. No warranty or representation is given that SHINCOR products described will be suitable in purchasers' formulations or processes for any particular end use. No representation is given as to freedom from patent infringement. Materials not manufactured or supplied by SHINCOR may present hazards in handling and use. Reference should be made to the manufacturer or supplier for all information relating to such materials. Click here to see next page quality goal | sales representation | facilities products | contact us Hosted by The MIS Group at Shin-Etsu and Shincor Silicones , Inc. Best viewed with Internet Explorer and 800 x 600 resolution